TheCrossFitShoes is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

How to Not Crease Shoes In 2022

To avoid your shoes from being creased while you’re out and about, you need to walk correctly and keep your feet firmly planted on the ground.

You should always aim to pick shoes that fit you well and are not too large or too tiny. 

You may do this by keeping a straight posture when walking, without putting too much pressure on your toes, lace-tightening, using shoe cushions and shoe horns, changing shoes often, and so on.

In general, most people would rather have their shoes seem fresh than wrinkled.

Many individuals are also bothered by wrinkles that press down on the tops of their toes or even their insteps from time to time.

But how can you protect your shoes from creasing while you walk?

Therefore, many individuals consider preventing shoe creases as an advantage for a variety of reasons.

What Does Crease In Shoes Mean?Not Crease Shoes

Shoe creases occur because they are meant to bend in the act of walking so that your feet may move freely.

The top material of the shoe must be compressed in order for this bending to be achieved.

When the shoe upper is stretchy enough to revert to its original form after being straightened, creasing develops.

An ugly crease or wrinkle is formed as the shoe’s material compresses due to the wearer’s activity.

All types of leather, canvas, and suede are in jeopardy. Any shoe may have a crease on it, regardless of how you feel about it.

What Causes Your Shoes To Crease?

Since your shoes are constructed and made of materials, they will wrinkle. It is possible for shoes to wrinkle and crease if the material and the surface are not perfectly smooth.

It’s simple to see that shoes made of high-quality materials retain their shape and resist creases while they are worn. Rubber, leather, foam, and cotton are some of the materials that are used in sneakers.

The majority of its composition is made up of rubber by weight and foam by volume, respectively.

For the design and adaptability of the hiking shoes, they’ve got it all! Crinkling is decreased with the use of these kinds of materials.

When you flex your feet, your shoes bend as well. This is one of the key causes of the crease in the shoe. It results in increases in the shoe.

In this fashion, it is important that the material of the shoes be smooth so that it bends easily and prevents you from hurting yourself while walking.

In addition, walking in a shoe that is rigid and difficult to bend might be painful

Shoes that don’t fit properly are another cause of shoe creases. 

In part, this is due to the fact that there is more room between the toe of the shoe and the rest of the shoe. More creasing occurs as a result.

How To Not Crease Shoes When Walking?Not Crease Shoes When Walking

Because walking causes your feet to bend and flex, it’s impossible to prevent creases. It generates wrinkles and detracts from the aesthetic appeal of your shoes.

Compression of the shoe’s upper causes creases. You’ll also feel the strain on your shoes when walking.

If you don’t do anything, though, the severity of the wrinkles may worsen. A worn-out appearance may result from using this.

Here are some suggestions for reducing shoe creases when walking so that you may prevent them:

1. Make sure you’re walking correctly:

You must walk correctly if you want to keep the creases out of your shoes. Crinkling might occur if you walk on your toes.

Toe walking is a kind of walking in which you walk on the balls of your feet rather than your heels. You can prevent creasing your shoes by walking on your heels.

Flattens the top material of your shoes. In addition, you won’t have to put in a lot of work and wear out your legs and shoes.

2. Make sure the garment fits well:

Avoid having too much room between your feet and the top material of your shoes. As a result, you’ll need the appropriate measurement.

As your shoe size gets closer to its ideal, the top material will have less room to expand.

It keeps the top material from creasing by allowing your feet to bear the weight of the upper material.

Crease occurs when the shoes are too big because of a lack of resistance from the top material, leading in a large amount of space between the feet and the upper material.

When you press your feet forward into the front of the shoe, look at the gap at the rear of your shoes to see whether they are the correct size. Make sure there isn’t too much room between your heel and the ground.

Additionally, the sides of the shoes’ uppers might often fold due to a poor fit or being too loose.

3. Avoid wearing shoes too often:

Avoid creases by not wearing out your shoes by wearing them all the time. When it comes to work shoes, it is recommended that you keep at least two pairs on hand.

The longer you walk, the more your shoes will flex and creasing. To prevent misuse and premature deterioration, wear your two pairs of shoes alternately.

4. Using a shoehorn is a good way to get around this:

The rear of your shoe may develop wrinkles if you have trouble inserting your heels.

If you wear your shoes carelessly and just stomp on the rear of them until you insert your heel, your shoes will be creased.

Using a shoehorn can make it simpler for you to get into your shoes, as well as avoid wrinkles.

When it comes to shoehorns, they’re all about the curves. You can slip your heel into your shoes more simply with this tool.

5. Put your shoes on snugly and make sure they are secure:

Using the appropriate shoelace tightening technique will help avoid wrinkles in your shoes and foot movement.

Blisters and bruises in your toenail from foot movement may also be avoided using this method. 

To keep your feet comfy and eliminate wrinkles, make sure your shoelaces are properly and snugly tightened.

6. Make sure your new shoes don’t get wet before wearing them:

Taking good care of your shoes can keep them looking beautiful for a longer period of time.

In the beginning, your feet’s heat and sweat will make shoe top materials more pliable and allow the shoes to mold themselves to your feet’ shape a bit.

If you let your shoes air dry for a while, they’ll take on the form of your foot’s imprint. A few weeks into the wear-in phase, your shoes will begin to feel more comfortable.

You should avoid getting your new shoes wet throughout the wear-in time since it will cause them to lose their form as they dry.

7. Apply a Water-Repellant Spray to Your New Shoes:

As a precautionary measure, new shoes should be sprayed with a water-resistant shoe spray (take care with suede shoes as some sprays can cause discoloration).

The goal isn’t to make your shoes waterproof so that you can ignore the fact that they get wet and still wear them, but rather to block water from seeping in and make it simpler to clean them.

You should give your shoes a spritz every three to six months to offer them an additional layer of protection and keep them looking their best.

8. Wear a different pair of shoes every day and alternate between them:

It’s a good idea to switch out your shoes every day so that they have more time to dry completely.

9. Shoes that Keep You Dry

Applying and rubbing in moisturizer to the uppers of leather shoes keeps the leather soft and supple.

You can’t go wrong with Mink Oil!

Keep in mind that leather is made from animal skin and, like your own skin, benefits from moisturizing.

In order to maintain the leather supple, it is important to moisturize and cleaning the creases on a regular basis to eliminate any buildup of dirt.

9. Avoid getting your shoes wet and keep them out of the sun’s rays:

Soaking wet shoes and then placing them in a heated area to dry are two of the worst things you can do to them.

To dry your wet shoes after a bath, you may have seen individuals lay them on top of radiators or even use hot air hair dryers.

As a result, they will lose their elasticity when they are dried this way. Similar to how spending all day in the sun dries and burns your skin.

How to Remove Stains from Your Shoes:

For those times when no other method will work, you may try ironing out the wrinkles, which can work to some amount but does take a degree of caution.

Despite the fact that this procedure does not work with all materials, it does work with leather to a certain degree.

You must carry out the following actions.

To make things a little bit simpler, take off your shoelaces:

  • Use newspaper or print-free paper to stuff the shoes as securely as possible, to minimize ink contamination or stains.
  • Set your iron to the lowest setting and heat it up. enough heat to generate steam when put on a moist fabric — a touch hotter than you could use for silk
  • Clean the wrinkled region of the shoe with a moist non-colored cloth.
  • Make the leather more malleable by ironing on top of the fabric and allowing the steam to permeate the upper layer.
  • Iron the shoe for a few seconds at a time until it begins to feel heated.
  • If the cloth isn’t moist enough, dampen it a little more at this step.
  • Dry the shoes by placing a moist towel on top of them.
  • Remove the towel and remoisturize the leather with Mink Oil.

Fixing a Shoe with a Crease:

There are a few of options for those who have wrinkled their shoes to the point where they can be seen.

Throwing away shoes that are just a few months old makes no sense at all! Is there any way to correct the wrinkles, though?

We, on the other hand, know a few tricks for getting rid of those creases and wrinkles off your shoes! Using heat isn’t necessary in any of these approaches.

Because not all shoes can be properly handled with heat, for example, choose the method that best matches your situation!

To Remove The Creases, Use An Iron:

First, pack your shoes from the heel to the toe box with old paper (old newspapers would do just fine) to keep them in shape and wrinkle-free.

Straightening out the wrinkles will make it simpler to cure the wrinkled region, so do this.

A dampened towel may be used to smooth out the wrinkles in your shoes after they have been packed with paper.

To use an iron, heat it to a temperature of 60-80°F.

The shoe should be ironed in 10 second intervals over the material.

To avoid further damage to the shoe, make sure to check the crease between ironing sessions.

Remove creases and let the shoe cool completely with the stuffing in place.

The mix of heat and water used to iron out a crease softens the shoe material, allowing the wrinkle to be stretched out.

The iron’s heat is dissipated by the towel, preventing scorch scars on your shoe’s material. Leather shoes are most suited to this method.

When it comes to suede shoes, wring out the towel as much as you can before applying! As you know, water and suede do not mix well.

Use a Hair Dryer:

If your shoes are made of leather, this is a safer method of reducing their size. You may use cedar shoe trees to maintain the form of your footwear in this technique.

In order to mend your shoes, follow these steps:

Turn the blow dryer on at a low heat setting.

Set it down after passing it over a few times while holding it 8-10 inches away from the shoe.

Rub the heated shoe surface against the shoe tree with your fingertips.

Re-apply until the crease is eliminated.

As soon as you’re done, put the shoe tree back in place and wait for it to cool off. Finish the process with either shoe polish or conditioner if using this approach on leather shoes.

You can mend wrinkles in your shoes without using heat, but there are other methods as well. Additionally, we’re able to recommend a few non-heat options for you.

Prepare Them:

To prevent wrinkles in leather shoes, try using a specific oil or conditioner before wearing them. Before using the product, try it out on a tiny area of the shoe.

Make certain there isn’t any discoloration. Polish or condition the whole shoe to maintain a consistent look.

Spend a little additional time working it into any crevices that may be present in your shoes, and don’t forget about your soles!

It’s a good idea to use a shoe tree to keep the form of your shoe as it dries.

Is It Normal For Shoes To Crease?

The creases on shoes are quite normal, and it’s hard to eliminate them altogether. Avoiding this difficulty is best done by ignoring the seam or even trying to embrace it. 

There’s always the option of reducing your odds of having them, or even getting rid of them if you need to.

Is a Crease Protector Actually Helpful?

Crease guards or sneaker shields are one of the most efficient crease remedies for any style of shoe.

They have the appearance of a toe box. The toe box is held in place and prevented from bending or creasing by the use of a wrinkle protectant.

What Happens to Your Feet and Knees When You Don’t Wear Shoes That Aren’t Crease-Proof?

Unfortunately, the answer to that question is ‘yes’. Your knees and heels are more likely to hurt if you don’t crease your shoes while you walk.

It’s simple to see that shoes made of high-quality materials retain their shape and resist creases while they are worn. Rubber, leather, foam, and cotton are some of the materials that are used in sneakers.

The majority of its composition is made up of rubber by weight and foam by volume, respectively.

For the design and adaptability of the hiking shoes, they’ve got it all! Crinkling is decreased with the use of these kinds of materials.

Patients with plantar fasciitis or arthritis may experience a worsening of their condition.

A crease over knee surgery is the preferred option for the majority of you as well, as no one wants to seem like they’re walking like a penguin.

The Bottom Line:

We all want our shoes to always appear clean and fresh. Avoiding shoe creases increases the risk of this happening.

Keep your shoes from crumpling and creasing by simply following the above-described instructions on how to walk without creasing them. 

This will keep your shoes looking and feeling fresh. You may leave your thoughts in the comment section below if you have any. Thank you for sharing these with us; it’s a pleasure to hear from you.